Slope flooring is particularly for the rooms that have water flowing such as gardens, garages and bathrooms. The main reason why the floor is sloped is for easier draining of water. You would not want puddles of water to form everywhere. This can cause accidents to you and your family. But how do professionals do the sloping?
Know where a drain is best placed
Before having a renovation of your room, evaluate where the drain is best positioned. Drains are mostly placed in a corner, but where in particular? Aside from the positioning, you should also consider what kind of flooring you have. You cannot just drill a hole on your floor for the drain installation.
Drains are created for the purpose of emptying the water in a particular area of the room. This is to avoid the building up of molds that can cause harm to your health. Some people may be allergic to this, and might experience adverse symptoms and asthma. Molds develop in dark and moist areas. They usually occur between the tiles and deep corners of your bathroom.
A slope guarantees that the water exits all the time to prevent the growth of these unwanted molds in your room. It is important to calculate the slope properly so that all the water and moisture are removed from your floor’s surface. Otherwise, this can lead to a wrecked property and health problems. The redoing will cost a huge amount of money and time.
Measure the Slope’s Steepness
After assessing where to place the drain, you can now start measuring how steep the floor’s slope should be. Your measurement will vary depending on the distance of a specific point from the drain. The farther that point is, the steeper the floor’s slope should be. It is for the water to easily exit completely into the drain.
The preferable slope is about 0.25 to 0.125 per running foot of the floor’s length. For every foot your pipe is travelling horizontally, it should be descending 0.25 inch vertically. All the areas surrounding the drain should have an identical slope. Improper sloped flooring is more likely to clog because of the tendency of water to drain too fast, leaving all the solids behind.
The floors that are not properly sloped can be costly. Due to clogged drain lines, you will be frequently calling for help from the experts to unblock the drain. Bear in mind that over sloped pipes are not good as well as the under sloped ones. You should stick to the right measurement of the floor’s slope to avoid redoing your floorings.
Remove the Current Flooring
After planning where the drain should be placed and what slope should be done, you will be removing your current floor. A waterproof layer will be added after you’re done with the existing floor. The waterproof layer is important for you to ensure that water will not be seeping through it. You would not want leaks on your flooring.
That layer would also keep the moisture from developing. It is necessary to use the trusted materials so that your flooring will be at its highest standards. Calling for professionals in this field is recommended. Let them handle the whole process of the construction of your slope flooring to avoid the risk of redoing it.
Establish the Drain
This process will be uncomplicated if you already have an installed drain. But if you are decided to construct a new drain, call for the drainage services for the correct installation of your new drainage system. If it is finished, you can now move on to restoring the flooring with the proper slopes. For a reliable service, contact Extreme Epoxy Industrial Coatings.
Whenever you experience problems involving your drainage, ask for help from the professionals. You can use their expertise in solving your issues. They will provide the best help to maintain your floor’s durability.
Leave A Comment